Try to hallucinate over all of samba config

Because I may need to update them right?

.claude/plugins/config.json

@@ -0,0 +1,3 @@
+{
+  "repositories": {}
+}

.claude/settings.json

@@ -0,0 +1,8 @@
+{
+  "env": {
+    "ANTHROPIC_DEFAULT_HAIKU_MODEL": "glm-4.5-air",
+    "ANTHROPIC_DEFAULT_SONNET_MODEL": "glm-4.6",
+    "ANTHROPIC_DEFAULT_OPUS_MODEL": "glm-4.6"
+  },
+  "alwaysThinkingEnabled": true
+}

.gitattributes

@@ -1,2 +0,0 @@
-cln filter=lfs diff=lfs merge=lfs -text
-cln.exe filter=lfs diff=lfs merge=lfs -text

.gitignore

@@ -0,0 +1,7 @@
+.claude/ide
+.claude/file-history
+.claude/shell-snapshots
+.claude/statsig
+.claude/todos
+.claude/history.jsonl
+.claude/projects

.tmux.conf

@@ -0,0 +1 @@
+set -g set-clipboard on

configuration.nix

@@ -0,0 +1,211 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running 'nixos-help').
+
+{ config, pkgs, ... }:
+
+{
+  imports = [
+    # Include the results of the hardware scan.
+    /etc/nixos/hardware-configuration.nix
+  ];
+
+  # Bootloader.
+  boot.loader.grub.enable = true;
+  boot.loader.grub.device = "/dev/sda";
+  boot.loader.grub.useOSProber = true;
+
+  networking.hostName = "nixos"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+  networking.nameservers = [
+    "1.1.1.1"
+    "8.8.8.8"
+  ];
+
+  # Set your time zone.
+  time.timeZone = "Europe/Zagreb";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_GB.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "hr_HR.UTF-8";
+    LC_IDENTIFICATION = "hr_HR.UTF-8";
+    LC_MEASUREMENT = "hr_HR.UTF-8";
+    LC_MONETARY = "hr_HR.UTF-8";
+    LC_NAME = "hr_HR.UTF-8";
+    LC_NUMERIC = "hr_HR.UTF-8";
+    LC_PAPER = "hr_HR.UTF-8";
+    LC_TELEPHONE = "hr_HR.UTF-8";
+    LC_TIME = "hr_HR.UTF-8";
+  };
+
+  # Enable the X11 windowing system.
+  # You can disable this if you're only using the Wayland session.
+  services.xserver.enable = true;
+
+  # Enable the KDE Plasma Desktop Environment.
+  services.displayManager.sddm.enable = true;
+  services.desktopManager.plasma6.enable = true;
+
+  # Configure keymap in X11
+  services.xserver.xkb = {
+    layout = "hr";
+    variant = "";
+  };
+
+  # Configure console keymap
+  console.keyMap = "croat";
+
+  # Enable CUPS to print documents.
+  services.printing.enable = false;
+
+  # Enable sound with pipewire.
+  services.pulseaudio.enable = false;
+  security.rtkit.enable = true;
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+    # If you want to use JACK applications, uncomment this
+    #jack.enable = true;
+
+    # use the example session manager (no others are packaged yet so this is enabled by default,
+    # no need to redefine it in your config for now)
+    #media-session.enable = true;
+  };
+
+  services.samba = {
+    enable = true;
+    securityType = "user";
+    openFirewall = true;
+    settings = {
+      global = {
+        "workgroup" = "SAMBA";
+        "security" = "user";
+        "passdb backend" = "tdbsam";
+        "vfs objects" = "acl_xattr";
+        "map acl inherit" = "yes";
+        "store dos attributes" = "yes";
+      };
+      "data" = {
+        "path" = "/mnt/data";
+        "read only" = "no";
+        "browsable" = "yes";
+        "guest ok" = "no";
+        "writable" = "yes";
+        "valid users" = "dave,jana";
+      };
+      "dave" = {
+        "path" = "/home/dave";
+        "read only" = "no";
+        "browsable" = "yes";
+        "guest ok" = "no";
+        "writable" = "yes";
+        "valid users" = "dave,jana";
+      };
+      "homework" = {
+        "path" = "/mnt/data/docker/volumes/captain--sync-data/_data/Homework";
+        "read only" = "no";
+        "browsable" = "yes";
+        "guest ok" = "no";
+        "writable" = "yes";
+        "valid users" = "dave";
+      };
+      "torrent" = {
+        "path" = "/home/dave/volumes/captain--torrent-downloads/_data";
+        "read only" = "no";
+        "browsable" = "yes";
+        "guest ok" = "no";
+        "writable" = "yes";
+        "valid users" = "dave";
+      };
+    };
+  };
+
+  services.samba-wsdd = {
+    enable = true;
+    openFirewall = true;
+  };
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with 'passwd'.
+  users.users.dave = {
+    isNormalUser = true;
+    description = "Dave";
+    extraGroups = [
+      "networkmanager"
+      "wheel"
+    ];
+    packages = with pkgs; [
+      kdePackages.kate
+      #  thunderbird
+    ];
+  };
+
+  services.openssh = {
+    enable = true;
+    ports = [ 22 ];
+    settings = {
+      PasswordAuthentication = true;
+      AllowUsers = [ "dave" ];
+      UseDns = true;
+      X11Forwarding = false;
+      PermitRootLogin = "no";
+    };
+  };
+  services.resolved.enable = true;
+
+  # Install firefox.
+  programs.firefox.enable = true;
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+    vim
+    git
+    lazygit
+    tmux
+    nixfmt-rfc-style
+    btop
+  ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+  networking.firewall.enable = true;
+  networking.firewall.allowPing = true;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It's perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "25.05"; # Did you read the comment?
+}

prometheus.yml

@@ -0,0 +1,56 @@
+# 793fc68064b5a5917eccf004ee6f30395a0464e7# my global config
+global:
+  scrape_interval: 5s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
+  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
+  # scrape_timeout is set to the global default (10s).
+
+# Alertmanager configuration
+alerting:
+  alertmanagers:
+    - static_configs:
+        - targets:
+          # - alertmanager:9093
+
+# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
+rule_files:
+  # - "first_rules.yml"
+  # - "second_rules.yml"
+
+# A scrape configuration containing exactly one endpoint to scrape:
+# Here it's Prometheus itself.
+scrape_configs:
+  # The job name is added as a label `job=<job_name>` to any timeseries scraped from this config.
+  - job_name: "prometheus"
+    static_configs:
+      - targets: ["localhost:43261"]
+
+  - job_name: 'node_exporter'
+    static_configs:
+      - targets: ['localhost:56546']
+    
+  - job_name: 'node_exporter_lilbox'
+    static_configs:
+      - targets: ['192.168.1.78:56546']
+
+  - job_name: 'power-meter-reader'
+    scrape_interval: 30s
+    static_configs:
+      - targets: ['localhost:20132']
+
+#   - job_name: 'windows-exporter'
+#     scrape_interval: 10s
+#     static_configs:
+#       - targets: ['192.168.1.64:9182']
+#
+  - job_name: 'libre-metrics-exporter-dave'
+    scrape_interval: 10s
+    static_configs:
+      - targets: ['192.168.1.64:9646']
+
+#   - job_name: 'libre-metrics-exporter-jana'
+#     scrape_interval: 10s
+#     static_configs:
+#       - targets: ['192.168.1.64:9646']
+
+remote_write:
+  - url: "http://127.0.0.1:8428/api/v1/write"

smb.conf

@@ -0,0 +1,66 @@
+# See smb.conf.example for a more detailed config file or
+# read the smb.conf manpage.
+# Run 'testparm' to verify the config is correct after
+# you modified it.
+#
+# Note:
+# SMB1 is disabled by default. This means clients without support for SMB2 or
+# SMB3 are no longer able to connect to smbd (by default).
+
+[global]
+	workgroup = SAMBA
+	security = user
+
+	passdb backend = tdbsam
+
+	printing = cups
+	printcap name = cups
+	load printers = yes
+	cups options = raw
+
+	vfs objects = acl_xattr
+	map acl inherit = yes
+	store dos attributes = yes
+
+	# Install samba-usershares package for support
+	include = /etc/samba/usershares.conf
+
+[data]
+	path = /mnt/data
+	read only = no
+	browsable = yes
+	guest ok = no
+	writable = yes
+	valid users = dave,jana
+
+[dave]
+	path = /home/dave
+	read only = no
+	browsable = yes
+	guest ok = no
+	writable = yes
+	valid users = dave,jana
+
+[localbin]
+	path = /usr/local/bin
+	read only = no
+	browsable = yes
+	guest ok = no
+	writable = yes
+	valid users = dave
+
+[homework]
+	path = /mnt/data/docker/volumes/captain--sync-data/_data/Homework
+	read only = no
+	browsable = yes
+	guest ok = no
+	writable = yes
+	valid users = dave
+
+[torrent]
+	path = /home/dave/volumes/captain--torrent-downloads/_data
+	read only = no
+	browsable = yes
+	guest ok = no
+	writable = yes
+	valid users = dave

sync-bigbox.yml

@@ -1,3 +1,6 @@
 - source: lazygit
   target: ~/AppData/Local/lazygit
   delete: true
+- source: .claude
+  target: ~/.claude
+  delete: true

sync-sparky.yml

@@ -4,3 +4,17 @@
 - source: lazygit
   target: /home/dave/lazygit
   delete: true
+- source: .tmux.conf
+  target: ~/.tmux.conf
+  delete: true
+- source: .tmux.conf
+  target: /home/dave/~/.tmux.conf
+  delete: true
+- source: configuration.nix
+  target: /etc/nixos/configuration.nix
+  delete: true
+- source: prometheus.yml
+  target: /mnt/data/persistent/monitoring/prometheus/config/prometheus.yml
+- source: smb.conf
+  target: /etc/samba/smb.conf
+  delete: true

tmux-daemon.sh

@@ -0,0 +1,141 @@
+#!/bin/bash
+# tmux-daemon.sh
+# Idempotent tmux daemon manager with config file support
+
+# Load config file if it exists
+SCRIPT_DIR=$(dirname "$0")
+SCRIPT_NAME=$(basename "$0" .sh)
+CONFIG_FILE="${SCRIPT_DIR}/${SCRIPT_NAME}.conf"
+if [ -f "$CONFIG_FILE" ]; then
+    echo "Loading config from $CONFIG_FILE"
+    source "$CONFIG_FILE"
+else
+    echo "Config file $CONFIG_FILE not found, generating template..."
+    cat > "$CONFIG_FILE" << 'EOF'
+# tmux-daemon.conf
+# Configuration file for tmux-daemon.sh
+
+# Session name
+SESSION="example"
+
+# Whether to attach to session after setup (0 or 1)
+ATTACH_SESSION=0
+
+# Commands to run (array format)
+# Format: "workdir:::command" OR just "command"
+CMDS=(
+    "ping google.com"
+    "ping google.com"
+    "ping google.com"
+    "ping google.com"
+    "ping google.com"
+    "ping google.com"
+    "ping google.com"
+)
+EOF
+    echo "Generated $CONFIG_FILE with default values. Please edit and run again."
+    exit 0
+fi
+
+# Validate required variables
+if [ -z "$SESSION" ]; then
+    echo "Error: SESSION must be set in $CONFIG_FILE" >&2
+    exit 1
+fi
+
+if [ ${#CMDS[@]} -eq 0 ]; then
+    echo "Error: CMDS array must be set in $CONFIG_FILE" >&2
+    exit 1
+fi
+
+echo "[main] SESSION: $SESSION"
+echo "[main] Commands: ${CMDS[*]}"
+
+# Create session if missing
+if ! tmux has-session -t $SESSION 2>/dev/null; then
+    echo "[main] Creating tmux session: $SESSION"
+    tmux new-session -d -s $SESSION -n win0
+else
+    echo "[main] Session $SESSION exists, reusing..."
+fi
+
+win=0
+pane=0
+
+for i in "${!CMDS[@]}"; do
+    entry="${CMDS[$i]}"
+    echo "[loop:$i] entry: $entry"
+    if [[ "$entry" == *":::"* ]]; then
+        workdir="${entry%%:::*}"
+        echo "[loop:$i] workdir set from entry: $workdir"
+        cmd="${entry#*:::}"
+        echo "[loop:$i] cmd set from entry: $cmd"
+    else
+        workdir="$PWD"
+        echo "[loop:$i] workdir set to PWD: $workdir"
+        cmd="$entry"
+        echo "[loop:$i] cmd set to entry: $cmd"
+    fi
+    echo "[loop:$i] Processing command: $cmd (workdir: $workdir)"
+
+    # Determine target window/pane
+    win=$((i / 4))
+    echo "[loop:$i] win updated: $win"
+    pane=$((i % 4))
+    echo "[loop:$i] pane updated: $pane"
+
+    # Create window if missing
+    if ! tmux list-windows -t $SESSION | grep -q "^$win:"; then
+        echo "[loop:$i] Creating window $win"
+        tmux new-window -t $SESSION:$win -n win$win
+    fi
+
+    # Get current pane count in window
+    panes=($(tmux list-panes -t $SESSION:$win -F '#P'))
+    echo "[loop:$i] panes in window $win: ${panes[*]}"
+
+    # Create missing pane if needed
+    if [ $pane -ge ${#panes[@]} ]; then
+        echo "[loop:$i] Splitting pane $((pane-1)) to create pane $pane in window $win"
+        if [ $pane -eq 1 ]; then
+            tmux split-window -h -t $SESSION:$win
+        elif [ $pane -eq 2 ]; then
+            tmux split-window -v -t $SESSION:$win
+        elif [ $pane -eq 3 ]; then
+            tmux split-window -v -t $SESSION:$win.1
+        fi
+        tmux select-layout -t $SESSION:$win tiled >/dev/null
+    fi
+
+    # Check if command is already running in the pane
+    running=$(tmux list-panes -t $SESSION:$win -F '#{pane_current_command}' | sed -n "$((pane+1))p")
+    echo "[loop:$i] running in pane $pane: $running"
+    if [[ "$running" == "$(basename "$cmd" | awk '{print $1}')" ]]; then
+        echo "[loop:$i] Command already running in pane $pane, skipping..."
+        continue
+    fi
+
+    # Create temporary script to run command in auto-restart loop
+    tmpfile=$(mktemp)
+    echo "[loop:$i] tmpfile created: $tmpfile"
+    cat >"$tmpfile" <<EOF
+#!/bin/bash
+cd "$workdir" || exit 1
+while true; do
+    echo '[tmux-daemon] Starting: $cmd (in $workdir)'
+    $cmd
+    echo '[tmux-daemon] Command exited with code \$?'
+    sleep 2
+done
+EOF
+    chmod +x "$tmpfile"
+    echo "[loop:$i] Sending command to pane $pane in window $win"
+    tmux send-keys -t $SESSION:$win.$pane "$tmpfile" C-m
+done
+
+echo "[main] Done."
+
+if [ $ATTACH_SESSION -eq 1 ]; then
+    echo "[main] Attaching to tmux session: $SESSION"
+    tmux attach -t $SESSION
+fi

tmux-oneshot.sh

@@ -0,0 +1,113 @@
+#!/bin/bash
+# tmux-oneshot.sh
+# Run a single command in a tmux session
+
+# Built-in prompt patterns (command_pattern:prompt_pattern:timeout_seconds)
+PROMPT_PATTERNS=(
+    "ssh*:Password|password:5"
+    "sudo*:Password|password|\\[sudo\\] password for:5"
+    "su*:Password|password:5"
+    "mysql*:Enter password:3"
+    "docker*:Password:2"
+)
+
+# Generic function to wait for prompts based on command patterns
+wait_for_prompt() {
+    local cmd="$1"
+    
+    # Find matching pattern for this command
+    for pattern in "${PROMPT_PATTERNS[@]}"; do
+        IFS=':' read -r cmd_pattern prompt_pattern timeout <<< "$pattern"
+        if [[ "$cmd" == $cmd_pattern ]]; then
+            echo "Waiting for prompt: $prompt_pattern (timeout: ${timeout}s)"
+            timeout=$((timeout * 10))  # Convert to 0.1s intervals
+            while [ $timeout -gt 0 ] && ! tmux capture-pane -t $SESSION -p | tail -3 | grep -E "($prompt_pattern)" >/dev/null 2>&1; do
+                sleep 0.1
+                timeout=$((timeout - 1))
+            done
+            if [ $timeout -eq 0 ]; then
+                echo "Timeout waiting for prompt: $prompt_pattern"
+            fi
+            return
+        fi
+    done
+    
+    # No pattern matched, brief pause
+    sleep 0.5
+}
+
+# Load config file if it exists
+SCRIPT_DIR=$(dirname "$0")
+SCRIPT_NAME=$(basename "$0" .sh)
+CONFIG_FILE="${SCRIPT_DIR}/${SCRIPT_NAME}.conf"
+if [ -f "$CONFIG_FILE" ]; then
+    echo "Loading config from $CONFIG_FILE"
+    source "$CONFIG_FILE"
+else
+    echo "Config file $CONFIG_FILE not found, generating template..."
+    cat > "$CONFIG_FILE" << 'EOF'
+# tmux-oneshot.conf
+# Configuration file for tmux-oneshot.sh
+
+# Session name (leave empty to use first word of command)
+SESSION=""
+
+# For multiple commands, use an array:
+# COMMANDS=("ssh root@server" "sudo su" "password123")
+COMMANDS=()
+
+# Whether to attach to session after running command (0 or 1)
+ATTACH_SESSION=0
+EOF
+    echo "Generated $CONFIG_FILE with default values. Please edit and run again."
+    exit 0
+fi
+
+# Validate required variables
+if [ -z "$SESSION" ] && [ ${#COMMANDS[@]} -eq 0 ]; then
+    echo "Error: Either SESSION or COMMANDS must be set in $CONFIG_FILE" >&2
+    exit 1
+fi
+
+# Use command line arguments if provided, otherwise use config
+if [ $# -gt 0 ]; then
+    COMMANDS=("$*")
+    echo "Using command line arguments: $*"
+else
+    if [ ${#COMMANDS[@]} -eq 0 ]; then
+        echo "Error: No commands provided and no commands set in config" >&2
+        exit 1
+    fi
+    echo "Using config commands: ${COMMANDS[*]}"
+fi
+
+# Use session name from config, or first word of first command if not set
+if [ -z "$SESSION" ]; then
+    SESSION=$(echo "${COMMANDS[0]}" | awk '{print $1}')
+fi
+
+# Create session if missing
+if ! tmux has-session -t $SESSION 2>/dev/null; then
+    echo "Creating tmux session: $SESSION"
+    tmux new-session -d -s $SESSION
+else
+    echo "Session $SESSION exists, reusing..."
+fi
+
+# Send commands individually with proper timing
+echo "Running commands: ${COMMANDS[*]}"
+for i in "${!COMMANDS[@]}"; do
+    cmd="${COMMANDS[$i]}"
+    echo "Running: $cmd"
+    tmux send-keys -t $SESSION "$cmd" C-m
+    # Only wait if there is a subsequent command
+    if [ $i -lt $((${#COMMANDS[@]} - 1)) ]; then
+        # Wait for command to complete or prompt for input with timeout
+        wait_for_prompt "$cmd"
+    fi
+done
+
+if [ $ATTACH_SESSION -eq 1 ]; then
+    echo "Attaching to tmux session: $SESSION"
+    tmux attach -t $SESSION
+fi